Call us +91-9911017299 +91-9891206088 +91-129-4096015


Polyurethane Powder Coatings

Nivera Paints India Private Limited

Polyurethane powders have excellent flow characteristics with excellent chemical and mechanical properties. Outstanding corrosion resistance and excellent external exposure properties make them suitable alternative to polyester powders.

General Features

Polyurethane powder contains polyurethanic resins cured with curing agents. The powder forms protective and decorative film along with enhanced outdoor resistance. The protective film have good resistance to mechanical damage, detergents, fuels and oils.

Advised Cycles

The surface to be coated must be cleaned from oils, grease or flash rust.  

Curing Temperature

The Curing schedule is 10-12 minutes @200 ºC metal temperature  

Handling and Storage

Store in a cool and dry place at a temperature lower than 30°C. Higher temperature may damage the chemical and mechanical properties of the powder.  


Because of its special content, these powders are suggested specially for exterior coating.  

It is always recommended to use a top coat with transparent powders on the top of the metallic powders. The top coat prevents oxidation of the metallic pigments of the base coat thus enhancing the life of the coating.


Agricultural and construction equipment, bus shelters, lighting fixtures, playground equipment, site furnishings, garage doors, stadium seating, fencing, automotive equipment, and marine applications.